PDA

View Full Version : Build your own TiPod



SGT Rock
2005-02-07, 21:31
http://www.ionstove.com/images/100_0311_small.JPG

Here are the plans:

http://hikinghq.net/ionstove/images/tipod_plan.jpg

Titanium is available here: http://hikinghq.net/osCommerce/catalog/product_info.php?cPath=23&products_id=31

Of course you need three sections. You can always change up the dimensions if needed. It should accommodate any stove that is 2.5" diameter or less and 7/8" tall or shorter. To make the standard model requires a sheet at least 2.5"x4.5"

You can cut almost everything for this plan with a good pair of snips, but a hacksaw would be best for the notches, a pair of snips can crack the metal trying to make those cuts. I try to put a slight bend in the metal before making the notches.

Lanthar
2005-02-08, 10:44
wow, just saw the new look for the ion area... cool... oh, and thanks for that pattern